LEA Connect 168D | installasjonsforsterker 8 x 160W, WiFi, Dante

8-kanals klasse-D forsterker med mulighet for 70V/100V og overvåking/styring over WiFi. Innebygget DSP (96 kHz) og Dante.

LydRommet SKU: 699-00082

Fabrikantens SKU: CS168D

EAN: 850011348550

LEA Connect 168D kombinerer IoT – «the internet of things», med profesjonelt forsterkerdesign. Brukergrensesnittet er web-basert, og kan aksesseres på tre måter: via innebygget WiFi aksesspunkt, husets WiFi eller LAN.

Dette muliggjør også overvåking og styring av forsterkerne via «LEA PROFESSIONAL CLOUD» – uten behov for VPN til husets LAN. Dette forenkler tidstyver som feilsøking og support, og gjør at du kan være i forkant av eventuelle problemer som skulle oppstå.

Last ned høyttaler-presets her

SPESIFIKASJONER:

Audio Spec	Inputs	Analog: Balanced Inputs with user selectable 26 dB and 34 dB input sensitivity (2CH = 2 inputs, 4CH = 4 inputs, 8CH = 8 inputs) Dante: 8 x 8 Dante at 96kHz or 48kHz, Multicast or Unicast AES 67: Configurable via the Dante Controller Software
	THD+N	0.1% (20Hz to 20kHz)
	Frequency Response	20Hz to 20kHz, +/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V, -2.5dB @ 20kHz at 2Ω
	Signal to Noise Level	105dB (20Hz to 20kHz referenced to 8Ω)
	Crosstalk	70dB (20Hz to 20kHz)
	Amplifier Output Classification	Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel
DSP	DSP Architecture	Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters
	Input Matrix	Routable matrix; any input to any output with primary and secondary input priority
	Crossovers	Up to 48 dB/Octave IIR Filters (Linkwitz Riley and Butterworth)
	Parametric EQ	8 Band Parametric EQ per channel
	Output Delay	100ms per channel
	Output Protection	DC, VHF, and AC Mains Protection, Overtemp and Current Limiter, fan fault detection
	User Adjustable Limiting	Peak Voltage and RMS Voltage
	Load Monitoring	Realtime Load Monitoring and Pilot Tone Detection from Internal or External Sources
Control, Monitoring, Network	User Interface	Web Browser User Interface, 3rd Party API control, or CLOUD control
Control, Monitoring, Network	External I/O	External I/O In: Toggles Remote On/Off External I/O Out: Indicates Amplifier Health
Operation	AC Mains	100VAC - 240VAC +/- 15% 50Hz or 60Hz
Operation	Power Supply	Universal Switch Mode Power Supply with Power Factor Correction (No PFC in 84D, 164D, 88D, & 168D)
Physical Spec	Dimensions (L x W x H)	Product: 14.25” x 19” x 1U (362mm x 482mm x 1U) x 1U (362mm x 482mm x 1U) Shipping: 20” x 22.75” x 3.75” (508mm x 578mm x 95.25mm)
	Weight	352D & 702D: 10lbs / 3.4kg \| Shipping: 17.4lbs / 7.9kg 354D & 704D: 14lbs / 4kg \| Shipping: 18.7lbs / 8.5kg 84D & 164D: 12.3lbs / 5.58kg \| Shipping: 16.6lbs / 7.53kg 88D & 168D: 13.6lbs / 6.17kg \| Shipping: 18lbs / 8.16kg
	Cooling

Produktinfo
Kontakt oss
Vedlegg

SPESIFIKASJONER:

Audio Spec	Inputs	Analog: Balanced Inputs with user selectable 26 dB and 34 dB input sensitivity (2CH = 2 inputs, 4CH = 4 inputs, 8CH = 8 inputs) Dante: 8 x 8 Dante at 96kHz or 48kHz, Multicast or Unicast AES 67: Configurable via the Dante Controller Software
	THD+N	0.1% (20Hz to 20kHz)
	Frequency Response	20Hz to 20kHz, +/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V, -2.5dB @ 20kHz at 2Ω
	Signal to Noise Level	105dB (20Hz to 20kHz referenced to 8Ω)
	Crosstalk	70dB (20Hz to 20kHz)
	Amplifier Output Classification	Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel
DSP	DSP Architecture	Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters
	Input Matrix	Routable matrix; any input to any output with primary and secondary input priority
	Crossovers	Up to 48 dB/Octave IIR Filters (Linkwitz Riley and Butterworth)
	Parametric EQ	8 Band Parametric EQ per channel
	Output Delay	100ms per channel
	Output Protection	DC, VHF, and AC Mains Protection, Overtemp and Current Limiter, fan fault detection
	User Adjustable Limiting	Peak Voltage and RMS Voltage
	Load Monitoring	Realtime Load Monitoring and Pilot Tone Detection from Internal or External Sources
Control, Monitoring, Network	User Interface	Web Browser User Interface, 3rd Party API control, or CLOUD control
Control, Monitoring, Network	External I/O	External I/O In: Toggles Remote On/Off External I/O Out: Indicates Amplifier Health
Operation	AC Mains	100VAC - 240VAC +/- 15% 50Hz or 60Hz
Operation	Power Supply	Universal Switch Mode Power Supply with Power Factor Correction (No PFC in 84D, 164D, 88D, & 168D)
Physical Spec	Dimensions (L x W x H)	Product: 14.25” x 19” x 1U (362mm x 482mm x 1U) x 1U (362mm x 482mm x 1U) Shipping: 20” x 22.75” x 3.75” (508mm x 578mm x 95.25mm)
	Weight	352D & 702D: 10lbs / 3.4kg \| Shipping: 17.4lbs / 7.9kg 354D & 704D: 14lbs / 4kg \| Shipping: 18.7lbs / 8.5kg 84D & 164D: 12.3lbs / 5.58kg \| Shipping: 16.6lbs / 7.53kg 88D & 168D: 13.6lbs / 6.17kg \| Shipping: 18lbs / 8.16kg
	Cooling

Navnet ditt *

Din e-post *

Forespørsel *

Product Files

Dante_Connect_Spec_Sheet_LEA_Professional_110920 (2)