JBL AW295 | 12 + 90x50 horn, glassfiber kab, grå

The AW295 is a high power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive dual voice coil and dual magnetic gap 2262H 300 mm (12 in) low-frequency driver and 2432H high-frequency 38 mm (1.5 in) exit, 75 mm (3 in) voice-coil compression driver.
Loading...
Fabrikant: JBL
LydRommet SKU: 801-02702
Fabrikantens SKU: AW295
Spesifikasjoner for produktene
Lenke til vår leverandør:https://jblpro.com/en-US/products/aw295

The large format Progressive Transition wave-guide provides excellent 90° x 50° coverage. The waveguide is rotatable so the loudspeaker system can used in either the vertical or horizontal orientation. The enclosure is constructed of multilayer glass composite and is heavily braced to maximize lowfrequency performance. The 14-gauge stainless steel grille, backed with open cell foam and stainless steel mesh, provides excellent protection in the harshest environments. The system is equipped with a 400 W 70/100V transformer. 

Features

  • Weather-Resistant, All Fiberglass Enclosure
  • 90° x 50° Coverage
  • 2262H Differential Driver® Low- Frequency Driver
  • 2432H High Frequency Compression Driver
  • Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion
  • Rotatable wave guide for vertical or horizontal orientation
  • Available in Gray and Black finish
  • 400 W, 70/100V Transformer Included
  • U-type Mounting Bracket Included

Applications

  • Sports Facilities
  • Themed Entertainment Venues
  • Outdoor Entertainment Centers
  • Cruise Ships
  • Water Parks

    The large format Progressive Transition wave-guide provides excellent 90° x 50° coverage. The waveguide is rotatable so the loudspeaker system can used in either the vertical or horizontal orientation. The enclosure is constructed of multilayer glass composite and is heavily braced to maximize lowfrequency performance. The 14-gauge stainless steel grille, backed with open cell foam and stainless steel mesh, provides excellent protection in the harshest environments. The system is equipped with a 400 W 70/100V transformer. 

    Features

    • Weather-Resistant, All Fiberglass Enclosure
    • 90° x 50° Coverage
    • 2262H Differential Driver® Low- Frequency Driver
    • 2432H High Frequency Compression Driver
    • Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion
    • Rotatable wave guide for vertical or horizontal orientation
    • Available in Gray and Black finish
    • 400 W, 70/100V Transformer Included
    • U-type Mounting Bracket Included

    Applications

    • Sports Facilities
    • Themed Entertainment Venues
    • Outdoor Entertainment Centers
    • Cruise Ships
    • Water Parks

      Øystein Johnsen
      SALG
      Tlf: 23 23 28 07
      Mob: 91 53 73 13
      Frequency Range (-10 dB)43 Hz – 20 kHz
      Frequency Response (±3 dB)53 Hz – 18 kHz
      Coverage Pattern90° x 50°, rotatable waveguide
      Directivity Factor (Q)12.6
      Directivity Index (DI)11 dB
      Crossover Frequency1.3 kHz
      Long-Term System Power Rating (IEC)500 W (2000 W peak), 100 hrs
      Maximum SPL126 dB-SPL cont avg (132 dB peak)
      System Sensitivity (1W @ 1m)98 dB SPL
      70V/100V Transformer Taps70V: 400 W, 200 W, 100W
      100V: 400W, 200W
      Low Frequency Driver1 x JBL 2262H 300 mm (12 in) Differential Drive® driver with (3 in) dual
      voice coil
      LFD Nominal Impedance8 ohms
      LFD Sensitivity (1W @ 1m, within operational band)96 dB SPL
      High Frequency DriverJBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
      HFD Nominal Impedance8 ohms
      HFD Sensitivity (1W @ 1m)113 dB SPL
      WaveguidePT-H95HF-1
      EnclosureHand-Laminated Fiberglass, gray gelcoat (black available)
      Suspension Attachment2 x M10 for Included U-Bracket, 2 x M6 for aiming stabilization, 1 x M10 on rear for safety.
      GrilleThree layer grille assemblies consisting of 14-gauge powder coated stainless steel, backed with open cell foam and stainless steel mesh.
      Input ConnectorCE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs.
      Environmental SpecificationsIP56 per IEC529
      Dimensions (H x W x D in horizontal cabinet orientation)409 x 732 x 452 mm
      (16.1 x 28.8 x 17.8 in)
      Net Weight25.2 kg (55.5 lb)
      Spesifikasjoner for produktene
      Lenke til vår leverandør:https://jblpro.com/en-US/products/aw295
      *
      *
      *
      Filtrer
      Sort
      display