JBL Control 23-1 | 3" høyttaler 8ohm/70V/100V, sort

Y
Loading...
Fabrikant: JBL
LydRommet SKU: 800-00130
Fabrikantens SKU: Control 23-1
Spesifikasjoner for produktene

This makes Control 23-1 an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality compact indoor/outdoor foreground/background music (and/or paging) speaker is required. The speaker provides a very natural sound character. The system is capable of handling 50 Watts continuous pink noise (100 Watts program) at its 8 ohm setting and is also equipped with a built-in 15 Watt 70V/100V multi-tap transformer for operation on distributed speaker lines. The combination of high sensitivity and power handling provides high Max SPL of 103 dB.

Features

  • Components:
  • 3” woofer with woven fiberglass cone
  • 1/2” PEI diaphragm tweeter with fluid cooling
  • Contemporary, high-design appearance
  • Built-in InvisiBall® mounting hardware*, plus available U-bracket
  • Weather resistant enclosure and transducers
  • Wide 100° x 100° coverage
  • 50 Watt power handling (100 Watt program) in direct 8Ω setting, plus built-in 15 Watt 70V/100V multi-tap transformer.
  • High fidelity sound character with broad frequency response of 70 Hz – 20 kHz.

This makes Control 23-1 an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality compact indoor/outdoor foreground/background music (and/or paging) speaker is required. The speaker provides a very natural sound character. The system is capable of handling 50 Watts continuous pink noise (100 Watts program) at its 8 ohm setting and is also equipped with a built-in 15 Watt 70V/100V multi-tap transformer for operation on distributed speaker lines. The combination of high sensitivity and power handling provides high Max SPL of 103 dB.

Features

  • Components:
  • 3” woofer with woven fiberglass cone
  • 1/2” PEI diaphragm tweeter with fluid cooling
  • Contemporary, high-design appearance
  • Built-in InvisiBall® mounting hardware*, plus available U-bracket
  • Weather resistant enclosure and transducers
  • Wide 100° x 100° coverage
  • 50 Watt power handling (100 Watt program) in direct 8Ω setting, plus built-in 15 Watt 70V/100V multi-tap transformer.
  • High fidelity sound character with broad frequency response of 70 Hz – 20 kHz.
Øystein Johnsen
SALG
Tlf: 23 23 28 07
Mob: 91 53 73 13
Frequency Range (-10 dB)70 Hz to 20 kHz
Frequency Response (+/-3 dB)95 Hz - 19 kHz
Power Rating100W Continuous Program (2 hrs)
50 W (200W peak), Continuous Pink Noise (2 hrs)
40 W (160W peak) Continuous Pink Noise (100 hrs)
Maximum Input Voltage17.2 V RMS (2 hrs), 34.4 V peak
Maximum SPL103 dB ave. Continuous Pink Noise (109 dB peak)
Sensitivity86 dB, 1W/1m (ave. 100 Hz – 10 kHz)
Coverage Angle100° x 100°
Directivity Factor (Q)5.8 (averaged 1kHz – 16kHz)
Directivity Index (DI)7.2 dB (averaged 1kHz – 16kHz)
Nominal Impedance8 ohms (THRU setting)
Crossover Type2nd order low-pass, 2nd order high-pass
Transformer Taps70V: 15W, 7.5W, 3.7W, 1.8W
100V: 15W, 7.5W, 3.7W
Insertion Loss < ,0.43 dB at any tap setting
Thru Setting: 8? nominal
Recommended Protective
High-Pass
70 Hz high-pass (24 dB/oct) (for 8? operation and for all 70V/100V taps settings).
Low Frequency Driver76 mm (3.0 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp Kapton™ voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.
High Frequency Driver13 mm (0.5 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.
Enclosure MaterialHigh Impact Polystyrene (HIPS), painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.
GrilleHighly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-23WMG-1 (& ,-WH) available with WeatherMax™ multi-layer foam and tight-weave mesh vapor barrier backing.
InstallationInvisiBall™ wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-23UB-1 (& ,-WH) U-bracket. Secondary safety attachment loop point on back panel.
EnvironmentalIP-44 per IEC529 (IP-55 when installed with the optional MTC-23WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & , UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-23WMG-1 WeatherMax™ grille for breaking up driving rain and for especially difficult environments.
TerminationScrew-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.
Agency RatingROHS-compliant , Transformer UL Recognized per UL1876
ColorsBlack (RAL9004) or white (-WH, RAL9016)
Dimensions (H x W x D)200 x 141 x 111 mm (7.9 x 5.6 x 4.4 in) , 141 mm (5.6 in) deep total when mounted on InvisiBall wall-mount bracket.
Net Weight1.8 kg (4.0 lbs)
Shipping Weight3.85kg (8.5 lbs) for the pair-pack (for 2 speakers) 12.0kg (26.5lbs) for the master-pack (for 6 speakers)
Included AccessoriesInvisiBall™ wall-mounting system), 4 mm x 80 mm hex key
Optional AccessoriesMTC-23UB-1 – Yolk-type U-bracket (& ,-WH)
MTC-23WMG-1 – WeatherMax grille with backing (& ,-WH)
MTC-23CM – Ceiling-Mount InvisiBall adapter (& ,-WH)
Spesifikasjoner for produktene
*
*
*
Kunder som kjøpte dette produktet, kjøpte også...

JBL Control 65PT | 5" pendelhøyttaler 8 ohm/70/100V, sort

801-00502
Control 65P/T incorporates JBL’s exclusive RBI Radiation Boundary Integration technology to provide very consistent, wide coverage throughout the listening space.

JBL Control 67PT | 6 1/2" pendelhøyttaler 8 ohm/70/100V 120°, sort

801-00504
Control 67P/T incorporates a large enclosure and high-power 6.5” (165 mm) transducer for extended bass and high-fidelity performance. The extra-large RBI Radiation Boundary Integrator™ provides outstanding pattern control, which can allow fewer speakers to cover a venue.

JBL 8124 | takinnfellingshøyttaler uten kabinett, 4", 70/100V

801-00000
The 8124 is a 4-inch, full-range, cost-effective loudspeaker for commercial applications. The 8124 features high-fidelity performance in an easy to install package.

JBL Control 60PST | 8" pendelsubwoofer 8 ohm/70/100V, sort

801-00508
The Control 60PS/T pendant subwoofer loudspeaker provides bass extension and high impact for high-fidelity sound systems in a wide variety of applications including restaurants, retail stores, music cafes, health clubs, theme bars, leisure venues, and other locations where full-range high fidelity foreground/background music systems are utilized.
Filtrer
Sort
display