JBL Control 25-1 | 5,25" høyttaler 8ohm/70V/100V, sort

The Control® 25-1 is a two-way 5” speaker with rich sonic character, wide coverage, consistent dispersion, versatile mounting, and a contemporary high-design look that fits into a wide range of decors.

Fabrikant: JBL

LydRommet SKU: 800-00131

Fabrikantens SKU: Control 25-1

Spesifikasjoner for produktene

Lenke til vår leverandør:	https://jblpro.com/en-US/products/control-25-1

This makes Control 25-1 an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality high-output indoor/outdoor foreground/background music (and/or paging) speaker is required. The frequency response is extremely smooth, resulting in a very natural sound character, and the response extends down to 60 Hz, providing strong bass capability. The system is capable of handling 100 Watts continuous pink noise (200 Watts program) at its 8 ohm setting and is also equipped with a built-in 30 Watt 70V/100V multi-tap transformer for operation on distributed speaker lines. The combination of high sensitivity and power handling provides high Max SPL of 110 dB

Features

Components:
• 5-¼” woofer with woven fiberglass cone
• 3/4” PEI diaphragm tweeter with fluid cooling
Contemporary, high-design appearance
Built-in InvisiBall® mounting hardware*, plus available U-bracket
Weather resistant enclosure and transducers
Wide 100° x 100° coverage
100 Watt power handling (200 Watt program) in direct 8Ω setting, plus built-in 30 Watt 70V/100V multi-tap transformer.
High fidelity sound character with broad frequency response of 60 Hz – 20 kHz.

Produktinfo
PRODUKTANSVARLIG
Spesifikasjoner
Spesifikasjoner
Kontakt oss
Vedlegg

Components:
• 5-¼” woofer with woven fiberglass cone
• 3/4” PEI diaphragm tweeter with fluid cooling
Contemporary, high-design appearance
Built-in InvisiBall® mounting hardware*, plus available U-bracket
Weather resistant enclosure and transducers
Wide 100° x 100° coverage
100 Watt power handling (200 Watt program) in direct 8Ω setting, plus built-in 30 Watt 70V/100V multi-tap transformer.
High fidelity sound character with broad frequency response of 60 Hz – 20 kHz.

Øystein Johnsen

SALG

Tlf: 23 23 28 07

Mob: 91 53 73 13

e-post: oystein@lydrommet.no

	Frequency Range (-10 dB)	60 Hz to 20 kHz
	Frequency Response (+/-3 dB)	85Hz - 17 kHz
	Power Rating	200 W Continuous Program (2 hrs) 100 W (400W peak), Continuous Pink Noise (2 hrs) 75 W (300W peak) Continuous Pink Noise (100 hrs)
	Maximum Input Voltage	25.3 V RMS (2 hrs), 50.6 V peak
	Maximum SPL	110 dB ave. Continuous Pink Noise (116 dB peak)
	Sensitivity	90 dB, 1W/1m (ave. 100 Hz – 10 kHz)
	Coverage Angle	100° x 100°
	Directivity Factor (Q)	6.04 (averaged 1kHz – 16kHz)
	Directivity Index (DI)	7.6dB (averaged 1kHz – 16kHz)
	Nominal Impedance	8 ohms (THRU setting)
	Crossover Type	2nd order low-pass, 3rd order high-pass
	Transformer Taps	70V: 30W, 15W, 7.5W, 3.7W 100V: 30W, 15W, 7.5W Insertion Loss < ,0.94 dB at any tap setting Thru Setting: 8? nominal
	Recommended Protective High-Pass	60 Hz high-pass (24 dB/oct) (for 8? operation and for all 70V/100V taps settings).
	Low Frequency Driver	135 mm (5.25 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.
	High Frequency Driver	19 mm (0.75 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.
	Enclosure Material	High Impact Polystyrene (HIPS), painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.
	Grille	Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-25WMG-1 (& ,-WH) available with WeatherMax™ multi-layer foam and tight-weave mesh vapor barrier backing.
	Installation	InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-25UB-1 (& ,-WH) U-bracket. Secondary safety attachment loop point on back panel.
	Environmental	IP-44 per IEC529 (IP-55 when installed with the optional MTC-25WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & , UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-25WMG-1 WeatherMax™ grille for breaking up driving rain and for especially difficult environments.
	Termination	Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.
	Agency Rating	ROHS-compliant , Transformer UL Recognized per UL1876
	Colors	Black (RAL9004) or white (-WH, RAL9016)
	Dimensions (H x W x D)	243 x 188 x 145 mm (9.6 x 7.4 x 5.7 in) , 203 mm (8.0 in) deep total when mounted on InvisiBall wall-mount bracket.
	Net Weight	3.4 kg (7.5 lbs)
	Shipping Weight	8.16 kg (18 lbs) for the pair-pack (for 2 speakers)
	Included Accessories	InvisiBall™ wall-mounting system), 6 mm x 100 mm hex key
	Optional Accessories	MTC-25UB-1 – Yolk-type U-bracket (& ,-WH) MTC-25WMG-1 – WeatherMax grille with backing (& ,-WH) MTC-28/25CM – Ceiling-Mount InvisiBall adapter (& ,-WH)

Spesifikasjoner for produktene

Lenke til vår leverandør:	https://jblpro.com/en-US/products/control-25-1

Navnet ditt *

Din e-post *

Forespørsel *

Product Files

Kunder som kjøpte dette produktet, kjøpte også...

JBL MTC25UB-1 | U-brakett til Control 25-1, sort

801-05042

JBL Control 25-1 | 5,25" høyttaler 8ohm/70V/100V, hvit

800-00134

JBL Control 50ST | 8" subbass med innebygget delefilter for 2-4 satelitter, sort

801-00402

JBL Control HST | 5" + 2x tweeter, 160 x 150 graders spredning, sort

801-00602

The Control HST utilizes JBL’s patent-pending Hemispherical Soundfield Technology™ to achieve extremely wide coverage of the listening space along with eliminating the primary wall reflection that tends to cause inconsistent sound when speakers are attached to a wall.