JBL Control SB2210 | sub med 2 x 10", sort

The Control SB2210 provides low frequency reinforcement for a wide variety of sound system applications. Its compact size, high output and outdoor capable design makes it one of the most versatile subwoofers in the installation market.
Loading...
Fabrikant: JBL
LydRommet SKU: 801-00129
Fabrikantens SKU: CONTROL SB2210
Spesifikasjoner for produktene
The internal angled baffle allows for a large port opening and compact front dimensions without compromising driver size. The Control SB2210 produces warm, punchy low-end sound.

Features

  • 2 x 250 mm (10 in.) Woven Fiberglass Cone LF Drivers
  • 500 Watts Power handling
  • Frequency Response Down to 38 Hz
  • 13 x M6 Insert Points Including Inserts for Optional U-Bracket
  • Compact, Low Profile Design
The internal angled baffle allows for a large port opening and compact front dimensions without compromising driver size. The Control SB2210 produces warm, punchy low-end sound.

Features

  • 2 x 250 mm (10 in.) Woven Fiberglass Cone LF Drivers
  • 500 Watts Power handling
  • Frequency Response Down to 38 Hz
  • 13 x M6 Insert Points Including Inserts for Optional U-Bracket
  • Compact, Low Profile Design
Øystein Johnsen
SALG
Tlf: 23 23 28 07
Mob: 91 53 73 13
Frequency Range (-10 dB)38 Hz - 500 Hz
Frequency Response (-3 dB)48 Hz - 95 Hz
Power Rating500W (2000W peak) Continuous Pink Noise (2 hrs)
1000W Continuous Program(2 hrs)
400W (1600W peak) Continuous Pink Noise (100 hrs)
Maximum Input Voltage 60.0VRMS (2 hrs), 120V peak
Sensitivity95 dB, 1W @ 1m in half-space (2? loading, average 50 – 90 Hz)
Max SPL122 dB in half-space (2? loading)
Nominal Impedance8?
Minimum Impedance7.2? at 160 Hz
Recommended Filter45 Hz, 24 dB/oct high-pass filter
Low FrequencyTwo 250 mm (10 inch) diameter LF drivers, long-excursion design, woven fiberglass cone, highly damped butyl rubber surround, linear suspension spider , high temperature anodized aluminum voice coil former, high-temp voice coil wire and coil adhesive, FEA optimized motor construction, aluminum conductive ring.
Enclosure MaterialHigh Impact PolyStyrene (HIPS) w/ 10% glass fill and internal 8 mm polyurethane co-mold, painted with highly-UV-resistant paint on white (-WH) model for maximum UV fade resistance.
GrilleThermoset composite coated steel, zinc-plated, 3-layer foam backing.
EnvironmentalIP-45 rating per IEC529 when installed with included MTC-PC2 terminal panel cover. Exceeds MilSpec 810 for humidity, salt spray, temperature & , UV. Passes Mil-STd-202F for salt spray.
TerminalsScrew-down terminal strip, zinc plated copper base, nickel-plated metal screws/washers. Accepts up to 9 mm outside, 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5mm2). Included MTC-PC2 and optional MTC-PC3 protective covers available to provide sealed entrance for additional weather protection.
Agency RatingROHS-compliant. Optional MTC-SBT300 transformer is UL recognized per UL1876.
ColorsBlack or white (-WH)
Dimensions (H x W x D)355 x 590 x 570 mm (14 x 23.3 x 22.5 in.)
Net Weight23.31 kg (51.4 lb)
Shipping Weight25.85 kg (57.0 lb)
Included Accessories1 pc MTC-PC2 input panel cover, 4 pcs floor standing feet 4 pcs beveled washers.
Optional AccessoriesMTC-210UB (& ,-WH) U-Bracket
MTC-SBT300 70V/100V Transformer, 300W multi-tap, installs onto inside of back input panel using included 4 studs.
Transformer Taps:
70V: 300W, 150W, 75W, 38W
100V: 300W, 150W, 75W
Spesifikasjoner for produktene
*
*
*
Kunder som kjøpte dette produktet, kjøpte også...

JBL Control 47LP PL | takinnfellingshøyttaler, 8 ohm og 100/70V, 120 gr, lav profil

801-00303
Built on the same platform as the Control 47C/T, the Control 47CT LP is a low-profile model intended for locations with limited above-ceiling clearance (only 5.6 inches deep)

JBL Control 25-1 | 5,25" høyttaler 8ohm/70V/100V, sort

800-00131
The Control® 25-1 is a two-way 5” speaker with rich sonic character, wide coverage, consistent dispersion, versatile mounting, and a contemporary high-design look that fits into a wide range of decors.

TiGHT AV USB3-MA/FA-AOC-30 | USB 3.1 Gen 1/Gen 2 AOC (Active Optical Cable) - 30m

670-90502
USB 3.1 GEN 1/GEN 2 AOC (ACTIVE OPTICAL CABLE) | Full bandwidth of 10Gbps. Powered by the USB Type A Male device. No external power supply needed. Available in 15m and 30m lengths. • Full bandwidth of 10Gbps. • Proprietary Low Power High Bandwidth Chipset. • EMI (electromagnetic interference) protection. • Powered by the USB Type A Male device. No external power supply needed. • Durable and strong. • Auto Low Latency Mode. • Support hot swap. • Pull Cover included for easy pulling of cables

JBL Control HST | 5" + 2x tweeter, 160 x 150 graders spredning, sort

801-00602
The Control HST utilizes JBL’s patent-pending Hemispherical Soundfield Technology™ to achieve extremely wide coverage of the listening space along with eliminating the primary wall reflection that tends to cause inconsistent sound when speakers are attached to a wall.
Filtrer
Sort
display