Sennheiser HMDC 27 | Headset, dynamisk mik, active guard, 200/600 ohm, kabel med XLR/jack

The new HMD 27-series invites the Broadcast Commentators and Audio Engineers to experience the highest level of wearing comfort.
Loading...
Fabrikant: Sennheiser
LydRommet SKU: 650-01681
Fabrikantens SKU: 506978
The top-of-the-line model is the HMDC 27, which features NoiseGard™ (active noise reduction) to perform well in very loud environments. By actively reducing the noise level by additional 15dB this headset increases intelligibility while at the same time protecting the user’s hearing and avoiding stress and fatigue due to noise. NoiseGard™ does not require the usual batteries but is conveniently powered via the microphone power supply from the broadcast desk or intercom system.

Features
  • Active noise compensation (NoiseGard™) additionally reduces noise by up to 15 dB. No batteries required: Power supply via microphone bias voltage from the commentator’s unit (P12-P48 as per DIN_EN 61938)

  • Highest wearing comfort due to the lightweight circumaural design and the splitted headband (no pressure on the sensitive fontanelle)

  • Accurate and linear sound reproduction for very demanding monitoring

  • Dynamic Microphone, which stands out due to a strong and powerful sound pattern for an audio transmission in highest broadcast quality even in noisy environments

  • ActiveGard© (on/off switch) for protected hearing against noise peaks > 110dB

  • Modular concept of different cables and boom arms to offer highest flexibility

  • Cables of the cable 26-II series are compatible

  • Swiveling ear cap for single sided listening

  • Microphone can be worn either on right or left hand side

  • Wide headband padding is included that converts the two-piece headband into a compact single piece

The top-of-the-line model is the HMDC 27, which features NoiseGard™ (active noise reduction) to perform well in very loud environments. By actively reducing the noise level by additional 15dB this headset increases intelligibility while at the same time protecting the user’s hearing and avoiding stress and fatigue due to noise. NoiseGard™ does not require the usual batteries but is conveniently powered via the microphone power supply from the broadcast desk or intercom system.

Features
  • Active noise compensation (NoiseGard™) additionally reduces noise by up to 15 dB. No batteries required: Power supply via microphone bias voltage from the commentator’s unit (P12-P48 as per DIN_EN 61938)

  • Highest wearing comfort due to the lightweight circumaural design and the splitted headband (no pressure on the sensitive fontanelle)

  • Accurate and linear sound reproduction for very demanding monitoring

  • Dynamic Microphone, which stands out due to a strong and powerful sound pattern for an audio transmission in highest broadcast quality even in noisy environments

  • ActiveGard© (on/off switch) for protected hearing against noise peaks > 110dB

  • Modular concept of different cables and boom arms to offer highest flexibility

  • Cables of the cable 26-II series are compatible

  • Swiveling ear cap for single sided listening

  • Microphone can be worn either on right or left hand side

  • Wide headband padding is included that converts the two-piece headband into a compact single piece

Anders Nannestad
SALG
Tlf: 23 23 28 11
Mob: 91 74 82 31
*
*
*
Filtrer
Sort
display