Sennheiser EM6000 | Digital 2-kanals mottaker

Digital 2-channel receiver for live productions and transmissions, even in the toughest environments. Huge spectral efficiency with equidistant frequency grid and true bit diversity. Analog and digital outputs (XLR, jack, AES-3, redundant Dante™), high-contrast OLED display with LQI indicator.
Loading...
Fabrikant: Sennheiser
LydRommet SKU: 650-02401
Fabrikantens SKU: 506657
Higher channel density with maximum signal reliability at the same time: Digital 6000 is intermodulation-free and assures through its equidistant frequency grid excellent spectral efficiency and the simplest frequency configuration– even in the toughest frequency environments where other systems already fail. Error correction and audio error masking recognize and fix problems long before they even become audible. When it comes to setup and the user interface, the EM 6000 stands out for clarity, relevance and short pathways. Digital 6000 can be seamlessly integrated into existing digital or analog infrastructures. The EM 6000 receiver has a digital AES-3 output with word clock inputs and outputs, high-quality transformer-balanced analog XLR and 6.3 mm jack outputs as well as a 6.3 mm headphone output. The Dante™ version with an Audinate Brooklyn ll card additionally offers two Amphenol RJ-45 connectors for integrating the receiver into a Dante™ network, for redundant networks or daisy chain cabling. 

The EM 6000 is compatible with UHF Sennheiser antenna systems.

  • 19’’ 2-Channel receiver, 19 inch 1RU

  • Large 244 MHz switching bandwidth

  • Legendary Long Range mode (LR) with proprietary audio codec (SeDAC) from the masterpiece Digital 9000

  • Link Density Mode (LD mode) with efficiency-optimized Audio Codec (SePAC) ensures up to 5 channels per MHz bandwidth

  • Equidistant frequency grid for maximum channel density and simplest setup

  • 32 superior quality RF pre-selection filters for optimal suppression of interference signals at antenna input

  • Error correction and audio error masking

  • AES-256 encryption

  • Automatic frequency setup

  • Digital and transformer balanced analog outputs XLR, 6.3 mm jack, AES-3, EM 6000 Dante with Brooklyn II Card and Amphenol RJ-45

  • Integrated antenna splitter for cascading of up to 8 systems

  • one high-quality OLED display per channel

  • Link Quality Indicator (LQI)

  • Wireless Systems Manager (WSM) compatible

  • Compatible with standard Sennheiser UHF antennas

  • Compatible with Digital 9000 transmitters in Long Range mode

Higher channel density with maximum signal reliability at the same time: Digital 6000 is intermodulation-free and assures through its equidistant frequency grid excellent spectral efficiency and the simplest frequency configuration– even in the toughest frequency environments where other systems already fail. Error correction and audio error masking recognize and fix problems long before they even become audible. When it comes to setup and the user interface, the EM 6000 stands out for clarity, relevance and short pathways. Digital 6000 can be seamlessly integrated into existing digital or analog infrastructures. The EM 6000 receiver has a digital AES-3 output with word clock inputs and outputs, high-quality transformer-balanced analog XLR and 6.3 mm jack outputs as well as a 6.3 mm headphone output. The Dante™ version with an Audinate Brooklyn ll card additionally offers two Amphenol RJ-45 connectors for integrating the receiver into a Dante™ network, for redundant networks or daisy chain cabling. 

The EM 6000 is compatible with UHF Sennheiser antenna systems.

  • 19’’ 2-Channel receiver, 19 inch 1RU

  • Large 244 MHz switching bandwidth

  • Legendary Long Range mode (LR) with proprietary audio codec (SeDAC) from the masterpiece Digital 9000

  • Link Density Mode (LD mode) with efficiency-optimized Audio Codec (SePAC) ensures up to 5 channels per MHz bandwidth

  • Equidistant frequency grid for maximum channel density and simplest setup

  • 32 superior quality RF pre-selection filters for optimal suppression of interference signals at antenna input

  • Error correction and audio error masking

  • AES-256 encryption

  • Automatic frequency setup

  • Digital and transformer balanced analog outputs XLR, 6.3 mm jack, AES-3, EM 6000 Dante with Brooklyn II Card and Amphenol RJ-45

  • Integrated antenna splitter for cascading of up to 8 systems

  • one high-quality OLED display per channel

  • Link Quality Indicator (LQI)

  • Wireless Systems Manager (WSM) compatible

  • Compatible with standard Sennheiser UHF antennas

  • Compatible with Digital 9000 transmitters in Long Range mode

Anders Nannestad
SALG
Tlf: 23 23 28 11
Mob: 91 74 82 31
  • Dimensions
    44 x 483 x 373 mm
  • Frequency response
    30 Hz - 20 kHz (1.5 dB)
  • THD, total harmonic distortion
    < , 0.03 % (@ 1 kHz)
  • Weight
    Approx. 5.2 kg
  • Power consumption
    Max. 35 W
  • Audio output
    Digital Audio outputs: AES3-2003, XLR-3: 48 kHz, 96 kHz, 24 bit
    Dante™, RJ-45: 48 kHz, 96 kHz, 24 bit
    Can be externally synchronized using WCLK loop-through with BNC sockets
    Analog Audio Outputs: XLR-3 and 6.3 mm jack per channel (transformer balanced)
    -10 dBu to +18 dBu in steps of 1 dB (2 k?)
  • Storage temperature
    -25°C to +70°C
  • Operating temperature
    -10°C to +50°C
  • Switching bandwidth
    244 MHz
  • Power supply
    100 - 240 V AC, 50/60 Hz
  • Antenna connector
    Input 2x BNC (50 ?), 12 V DC, max. 200 mA each via antenna sockets, short circuit proof, Output 2 x BNC (50 ?)
  • Dynamic range
    111 dB (A) type
  • Frequency range
    470 - 714 MHz
  • Headphone output level
    6.3 mm jack, 2x 100 mW at 32 ?
  • Image rejection
    > , 100 dB typ.
  • Sensitivity
    -100 dBm typ.
  • Word clock
    Input: BNC, 75 ?
    Output: BNC, 75 ?
    Sampling Rates: 48 kHz, 96 kHz
  • Operating relative humidity
    Operation: Max. 85% at 40°C (non-condensing)
    Storage: Max. 90% at 40°C (non-condensing)
  • Transmission method
    Digital modulation, “LR” mode Min. frequency spacing for equidistant grid: 325 kHz
  • Latency
    Analog Audio Out: 3 ms
    Digital Audio Out: 3 ms (AES/EBU)
  • Audio codec
    SeDAC (Sennheiser Digital Audio Codec)
  • Network protocol
    IEEE 802.3-2002 (10/100 Mbit/s), shielded RJ-45 connection
  • Receiver Principle
    Double superheterodyne
  • Diversity principle
    True bit diversity
  • Encryption
    AES 256
  • Daisy chain outputs
    2x BNC (50 ?) 0 dB +/- 0.5 dB amplification relative to antenna inputs
  • Receiving channels
    2
  • Daisy-chained receivers (RF)
    Max. 8 EM 6000 units
  • Dante™ (only EM 6000 DANTE)
    IEEE 802.3 (1000 Mbit/s), shielded RJ-45 connection
  • Power plug
    3-pin, protection class I as per IEC/EN 60320-1
  • Water Protection Code
    The product must not be exposed to dripping and splashing (IP2X)
*
*
*
Filtrer
Sort
display